Archives: Produkte
Alba is the world’s first fully integrated Brillouin spectrometer based on on-chip silicon photonics. Alba is a miniaturized device with no additional optical components. This makes it inherently alignment-free and suitable for laboratory environments with limited space (size 12 x 14 x 10 cm³). Despite its very small size, there is no need to compromise […]
The lasers in the powerMIR product range are based on Fabry-Pérot quantum cascade lasers. The powerMIR lasers emit at a desired wavelength in the two transmission bands of the atmosphere, from 3-5 µm (5000 – 2000 cm-1) and 8-12 µm (1250 – 833 cm-1). The lasers are manufactured in France, are ITAR-free, and offer outstanding […]
A wavelength range from 10 to 19 µm (corresponding to 1000 to 526 cm-1) can be covered by mirSense’s uniMIR DFB-QCL (Distributed Feedback Quantum Cascade Laser). Together with the University of Montpellier, mirSense holds the exclusive license to manufacture lasers in this wavelength range. In 2021, mirSense was a finalist in the “smart sensing” category […]
The BIPD filter from spectō photonics is a compact optical system for carrying out Brillouin spectroscopy. BIPD stands for “Birefringence-Induced Phase Delay,” i.e., phase shift induced by double refraction. This component is used to suppress the elastic background light, which originates among other things from Rayleigh scattering. This enables the detection of very weak Brillouin […]
If you would like to carry out your own optical measurements yourself, but you don’t have the necessary space or measuring instruments, you can use our lab instead. This dark laboratory, specially equipped for radiometry and photometry, is situated in our company building in Landsberg am Lech. DDepending on availability, the optical systems from our […]
The MFLI digital lock-in amplifier from the Swiss manufacturer Zurich Instruments can demodulate the input signal in the frequency range from DC to 500 kHz (optionally up to 5 MHz). The data is controlled and evaluated via the built-in data and web servers, which can be accessed from any mobile device with a web browser. […]
The WiDy SWIR 640 is an HDR camera with patented HDR technology (120 dB). With a VGA resolution of 640 x 512 pixels and a pixel pitch of 15 µm, this camera delivers good image quality. The built-in sensor is the NCS1201-SI and due to the pixel design and NUC correction, this camera does not […]
WiDy SenS 320 The WiDy SenS 320 is a high-speed camera and can be used for a wide range of applications thanks to its cost-effective design. With a QVGA resolution of 320 x 256 pixels and a pixel pitch of 15 µm, this camera offers solid image quality. The camera has a dual response behavior […]
The MSDC-2-4 multi-sensor drone cameras are a further development of the simple multispectral drone cameras to a robust, even more functional and amazingly lightweight system with up to 4 cameras for simultaneous recording. The included cameras are complemented by suitable lenses, on-board data processing, the GPS antenna with RTK capability, the drone mount and the […]
The multispectral multi-camera systems are an extension of the simple multispectral cameras in order to achieve an extended spectral range with a higher number of spectral bands or a higher resolution by combining two cameras in one housing. The combination of the cameras via an internal beam splitter enables a common beam path of the […]
If a complete multispectral solution with controlled lighting is required, the multispectral MSIS systems are an ideal solution. The combination of multispectral camera, tuned high-power LEDs in a dustproof and waterproof housing together with an external control unit enables independent operation even in damp environments. Due to the pulsed operation of the LEDs, both reflection […]
Together with a coordinated lens, a mini vision computer and the appropriate software for camera control and image acquisition, the multispectral cameras become an easy-to-integrate complete solution for multispectral drone imaging. The recorded images can be sent to the ground as a multispectral live video stream and/or the recordings can be saved directly on the […]
Depending on the camera, between 2 and 16 spectral bands in the wavelength ranges between 350 and 1000 nm (VIS-NIR basic camera) or 1000 and 1700 nm (SWIR basic camera) are detected simultaneously by the integrated multispectral filter arrays. Due to the short integration times, spectral information per pixel can be collected in real time, […]
The WiDy NaNo 640 is an ultra-compact and miniaturized camera. With a VGA resolution of 640 x 512 pixels and a pixel pitch of 15 µm, this camera delivers good image quality. It also has a high dynamic range of 120 dB and a 100 fps full frame. The built-in sensor is the NCS1201-SI and […]
SenS 1280 and SenS 1280 Smart The SenS 1280 is a highly sensitive SWIR camera with an SXGA resolution of 1280 x 1024 pixels and a pixel pitch of 10 µm. It is ideal for detailed and sharp images. Thanks to the linear response mode, the SenS 1280 has a high sensitivity. It also has […]
The LiSa SWIR 2048 is a line scan array camera, specially developed for applications where high sensitivity and image quality are required. This camera has a 2K resolution with 2048 x 1 pixels and a pixel pitch of 7.5 µm. With a frame rate of 60 kHz, fast-moving objects can be captured precisely. In addition, […]
The HiPe SenS 640 is the high performance camera from New Imaging Technologies. With its QVGA resolution of 320 x 256 pixels and a pixel pitch of 15 µm, this camera offers solid image quality. In addition, the camera has a so-called “bad pixel replacement” and is equipped with intelligent non-uniformity correction (NUC). It is […]
The Modulo Quatro is a versatile multi-point laser interferometer based on Multichannel Random Quadrature (MCRQ) technology. It has four measurement channels, each representing an independent measurement point, and can either pass four detection points through a single optical head or use four independent optical heads. Measuring points that are close together increase the scanning speed […]
The Modulo Uno is a streamlined speckle-interferometer for vibration analysis based on Multi-Channel Random Quadrature technology. This technology uses the scattering effect of less reflective surfaces to capture as many laser speckles as possible. The combined probe beam, consisting of the reflected beam from the sample and the reference beam, is directed onto a single […]
The L1C and the structurally longer L1C+ platforms offer efficient, compact and cost-effective solutions for the expansion of LCX, LPX, LSX or LBX-S lasers and meet the need for stable and power-controllable laser sources in metrology or Raman spectroscopy. The L1C or L1C+ consists of a LaserBoxx source that is aligned with either a modulator […]
The L4Cc and L6Cc laser combiners are compact and flexible all-in-one multi-color laser sources with up to 7 laser lines and up to 4 fibre optic outputs. The modular design of the combiners allows a large selection of lasers from different manufacturers from 375 nm – 1064 nm with output powers of up to 500 […]
The LaserBoxx HPE series high-power lasers deliver excellent performance and reliability in a compact, driver-integrated laser head. The optical output is an elliptical multimode beam that is either free-radiating or coupled into an optical fiber. Optionally, the laser beam can be coupled into a multimode fiber in a cost-effective and compact way using the ACX-FCMM […]
The single-mode lasers in the LaserBoxx series are available as DPSS lasers (LCX and LPX models) or as diode lasers (LBX and LSX models). The diode lasers are based on the integration of a temperature-stabilized laser diode. Due to their stable design and low noise current, these models deliver ultra-narrow linewidth emission. Further advantages of […]
The LaserBoxx series includes DPSS lasers (LCX and LPX models) and diode lasers (LBX models). The LBX models consist of a laser diode emitter with integrated driver and, in addition to a low-noise optical output, also offer a very high beam density, excellent stability and fast modulation options. The LBX models also offer fast TTL […]
Faraday isolators MOGLabs’ Faraday isolators provide the outstanding performance required for demanding external cavity diode laser applications, including coupling with single-mode fibers and high-finesse optical resonators. High isolation of the wavelength used is essential to avoid frequency instabilities caused by feedback in the laser resonator. One- and two-stage options are available with isolation up to […]
The PDA030 from MOGLabs is an amplified silicon photodetector designed for demanding low-noise applications such as Pound-Drever-Hall Optical Cavity Locking. It offers a high bandwidth (adjustable depending on the used photodiode), high quantum efficiency and low-noise photodetection in a practical mechanical housing with a small footprint (43 mm x 65 mm x 22 mm incl. […]
In addition to the Fizeau wavemeter, there is also the compact and inexpensive MWM wavemeter from MOGlabs, which can be used to set a tunable laser to an exact wavelength. The wavelength can be selected between 370 – 1120 nm and the wavelength range is then ± 10 nm with an accuracy of 100 MHz. […]
The FZW uses an internal Fizeau interferometer as the basis for precise spectral measurements over the entire wavelength range of the silicon detector (350 nm – 1120 nm) without recalibration and up to 1280 nm on request. The typical spectral resolution is around 10 MHz with an accuracy of approximately 200 MHz. The measurements and […]
The FSC is a high-speed PID servo controller for laser mode-locking with high bandwidth and separate control loops for fast (typically diode current) and slow (typically piezo) feedback for full control of the laser frequency. Critical feedback parameters can be easily adjusted using the wide range of front panel controls to control resonant coupling, linewidth […]
The LDD laser diode driver is a combined current and temperature controller for amplifier diodes and controls all laser amplifiers such as MSA/MOA from MOGlabs with sophisticated menu navigation on the front panel and a plain text interface for computer commands via Ethernet and USB. A high-precision current source controls a wide range of diodes […]
The MOGbox DLC laser diode controller is an all-in-one controller for driving and mode coupling MOGlabs lasers or other ECDLs. Each model includes: Ultra-low-noise diode power source, < 100 pA/rtHz, DC up to 1 MHz Temperature controller with Peltier-TEC driver Scanning generator Two high-voltage piezo drivers Differential low-noise photodetector, 700 kHz bandwidth Lock-in amplifier AC […]
The MSL is MOGlabs’ approach to realizing some laser wavelengths that are otherwise difficult to access with sufficiently high output power. A tunable laser is installed in a housing with a Faraday isolator and an NLO crystal for frequency doubling. This provides power in the blue range for wavelengths that laser diodes alone can only […]
The MOGLabs MFE is a modular high-performance fiber reinforcement system based on Er- and Yb-doped active fibers. The MFE amplifies either an internal MOGlabs seed laser or an external seed laser with up to three amplifier stages and achieves an output power of 500 mW to 20 W. The seed laser for this is a […]
The MOAL / MOAC are compact, robust and stable conical amplifier systems for wavelengths from 650 to 1080 nm, with an output of up to 4 W. Three versions are available in the MOA series, depending on the existing setup. The full-size MOA offers all the capabilities of the MSA, including the option of single- […]
The MOGLabs MGPA is a compact fiber laser system with a seed laser and a preamplifier (MGF) developed by MOGlabs, which operates in either the Yb (1020 nm to 1100 nm) or Er (1530 nm to 1610 nm) wavelength ranges. The options include an internal or external seed, e.g. a DFB diode or MOGLabs CES. […]
MOGLabs has developed a new technology for stable injection locking of Fabry-Perot (FP) laser diodes. Injection mode locking was previously impaired by extreme sensitivity to environmental drift: This is because very small changes in temperature, alignment or power can cause the amplifier diode to get out of alignment. MOGLabs has developed an automatic feedback system […]
The Cateye Laser CES from MOGLabs combines the advantages of Cateye filter technology with unique laser diodes in butterfly design with single-angle facets. The CES is characterized by an extremely low linewidth (5 kHz) and a very large tuning range and has an integrated Faraday isolator and direct fiber coupling. Currently available wavelengths and maximum […]
The improved Littrow diode laser from MOGlabs with extended resonator and chassis in an all-in-one design. There are no coil springs that vibrate. Made from a solid block of aluminum, this laser is compact, robust and stable. The precise, reproducible vertical alignment and the rotation of the grating are decoupled from each other, so that […]
The MOGLabs Cateye laser offers a new approach to external cavity diode lasers. A Cateye reflector and an ultra-narrow filter replace the alignment-sensitive diffraction grating of conventional Littrow and Litman-Metcalf designs. For wavelengths from 500 nm up to 1612 nm. The CEL is robust, stable and acoustically inert. The manufacturer promises that you can literally […]
The industrial inline color sensor Atto IC outperforms any RGB color sensor with its very high LAB color accuracy and enables industrial quality assurance in demanding, color-based applications at an attractive price. The objects are illuminated with the built-in white light LED from a fixed distance of typically 10 cm (adjustable) and measured without contact. […]
Phoenix is a configurable sensor for inline process analysis that has a modular design and can be flexibly adapted to changes in the process, even during production. The sensor adapter supports a wide range of process interfaces and can even be used in hazardous areas, making it the only interchangeable process interface for hazardous areas […]
The color of surfaces can be determined very easily and accurately using the Reflection variants of the MountainSphere. For this purpose, a fiber-coupled broadband light source is connected to the collimating lens built into the MountainSphere. A collimated light beam thus illuminates the surface of the sample, which is simply placed on the MountainSphere or […]
The Haze versions of the MountainSphere have a light exit port on the opposite side to the light entrance port, which can be opened and closed with a lever. In this way, the diffuse and directional components can be determined separately for both reflection and transmission measurements. In this way, the haze value of the […]
The ultra-fast Ti:Sapphire laser Tenacity is based on the latest technology of direct diode pumping. It delivers an output power of up to 500 mW from a monolithic, compact laser head. The laser diodes are combined with a dispersive mirror design so that the femtosecond laser can be integrated into a single housing, significantly reducing […]
The TRICLOPS spectrometer enables the simultaneous recording of a complete spectrum from 400 nm to 4500 nm with just one compact device and combines spectroscopy of the visible wavelength range with the higher wavelength ranges up to the mid-infrared. Thanks to the flexible optical inputs, the TRICLOPS can be coupled into both free-space collimated and […]
The OptiQuiver is a very universal optical measuring instrument and works with practically all types of optical radiation. The sources can be narrowband and highly coherent, such as lasers, but also broadband such as LEDs or white light sources. Furthermore, the radiation can be divergent, collimated or focused. An internal broadband light source is also […]
The Qneo from Broadcom is a compact spectrometer tailored for industrial applications and integration in systems in the near-infrared range. With its InGaAs detector, it covers the near infrared range from 950 to 1700 nm with remarkable sensitivity. It is delivered ready for immediate use and has integrated electronics with short sensor readout times. Broadcom […]
For reflection measurements, we recommend the Reflection versions of the MountainSphere, which are equipped with a fiber-coupled collimating lens that generates a collimated beam within the integrating sphere. This beam illuminates the sample so that the reflected light is completely captured by the MountainSphere. The standard angle of incidence here is 20°. However, this can […]
The Irradiance versions of the MountainSphere are ideal for transmission measurements on transparent samples. For this application, we recommend mounting the MountainSphere on the MountainSphere stand to generate a collimated light beam through the sample into the integrating sphere via its fiber-coupled collimating lens. The angle of incidence can be varied between 0° and 20°. […]
Spectral measurement of absolute radiant flux from 400 nm to 1000 nm Our customized versions of the MountainSphere can be calibrated together with the entire optical setup to measure the absolute spectral radiant flux. The light source to be measured can be measured in either the 2π or 4π configuration. For this, the MountainSphere is […]
Spectral measurement of absolute irradiance from 200 nm to 2500 nm The Irradiance variants of the MountainSphere can be calibrated together with the entire optical setup to measure the absolute spectral irradiance. Depending on the application, different wavelength ranges from 200 nm to 2500 nm are available. The calibration points can be aligned with the […]
LIFA is a complete system for the measurement of time-resolved fluorescence or FLIM (Fluorescence Lifetime-Imaging Microscopy). It can be very easily connected to all common fluorescence microscopes and allows extremely fast image acquisition, both in terms of measurement time in a few seconds, as well as the recorded processes from 0 – 300 ns with […]
TRiCAM from Lambert Instruments is a high-performance, yet compact fluorescence camera that is connected to fluorescence microscopes. Like HiCAM Fluo, its exposure time can be adjusted down to the nanosecond range to image even the fastest phenomena. By using high-quality Gen II or Gen III amplifiers, recordings down to the detection of single photons are […]
HiCAM from Lambert Instruments is a high-speed camera for applications with challenging conditions, whether very low light conditions or particularly fast-moving processes. A 1.3-megapixel sensor captures high-resolution images at frame rates of up to 500 fps. If required by the circumstances, the resolution can even be reduced up to 2000 fps in favor of the […]
HiCAM Fluo from Lambert Instruments is a particularly powerful yet compact fluorescence camera that is connected to fluorescence microscopes. Its exposure time can be adjusted down to the nanosecond range to image even fastest phenomena. By using high-quality Gen III amplifiers (18 or 25 mm), imaging down to the detection of single photons is possible. […]
The TRiCATT (time-resolved intensified camera attachment) from Lambert Instruments is a very compact amplifier for high-speed cameras or spectrometers. Phenomena that occur very quickly or under very low light conditions (or under very low fluorescence) can be captured and imaged. Depending on the measurement setup, the TRiCATT can be individually optimized. In addition to amplifying […]
Like all of GoyaLab’s IndiGo products, the Raman-532 is an extremely compact spectrometer. It combines an IndiGo spectrometer with increased resolution with a Raman module, including laser, sample holder and protection function to protect from the laser radiation inside. Due to the longer built-in diffractive optics, the IndiGo HR achieves a resolution of 0.2 nm, […]
The HiCATT camera attachment from Lambert Instruments (HiCATT stands for High-speed intensified camera attachment) can be used with a variety of high-speed cameras. For this purpose, it is directly connected to the lens and, by significantly increasing the sensitivity, allows taking pictures with enormous speed and resolution, even in very low light conditions. Special features […]
The RG Raman spectrometers with available laser wavelengths of 405, 532, 633 and 785 nm provide high spectral resolution, high sensitivity and cover a wide spectral range. They use diffraction optics with a very high throughput and a very stable laser power, making them ideal for quantitative measurements or long-term measurements. The high resolution especially […]
With its first-class third-generation Research Grate (RG) Microscope, Lightnovo delivers a confocal Raman microscope for modern research. The RG Microscope is the answer to powerful and demanding Raman microscopy, which requires high spectral and spatial resolutions, an extended spectral range, and exceptional laser stability. The most important features of the RG Microscope include its modular […]
The 3rd generation of the miniRaman spectrometer is the most compact and powerful version of the miniRaman series of Lightnovo. As the world’s smallest Raman spectrometer at all, it operates on a level of a research instrument and delivers excellent results for quantitative analyses with high sensitivity. The special feature of the miniRaman spectrometer is […]
The miniRaman Microscope is the world’s smallest confocal and modular Raman microscope. With its compact size of 175 x 180 x 410 mm and its weight of 9,5 – 11,5 kg the microscope is suited for portable use. The core peace of the miniRaman Microscope is the miniRaman Spectromter or the miniRaman PRO with its […]
The near-infrared spectrometer IndiGo NIR has a modular design and can measure emssion, absorption and transmission spectra from 720 nm to 1040 nm at a resolution of about 2nm (FWHM). The IndiGo NIR can be connected to Smartphone or tablet via bluetooth or to a pc via USB-connection. When connected via Bluetooth, the device operates […]
The IndiGo fluo spectrometer from GoyaLab consists of the core module IndiGo UV/Vis and of a excitation source, either a LED (UVA, UVA-B, UVA-C) or a laser light source. The modular spectromter has a compact design and can be connected with smartphone or tablet (via bluetooth) or with a pc (with USB). IndiGo fluo versions […]
The IndiGo UV/Vis from Goyalab is a portable spectrometer for measurements in the visible range and can measure emission, absorption or transmission spectra from 380 nm to 780 nm at a resolution of less than 1.5 nm (FWHM). The SpectroLab software, which is available as pc application (USB-C) or as android version (Bluetooth), is included […]
The SPIDER (Singel-PIxel DEtectoR) photodetector from Nireos covers an extensive wavelength range of 320 nm – 1700 nm thanks to the innovative sandwich design of a silicon (Si) and an indium gallium arsenide (InGaAs) photodiode. For the first time, it offers a complete device with an integrated 24-bit data acquisition system. In combination with the […]
The Qmini from Broadcom is a miniature spectrometer designed for industrial applications and integration into systems. With a choice of optical gratings in this matchbox-sized spectrometer, different wavelength ranges can be covered from 220 to 1100 nm. It is delivered ready for immediate use and has integrated electronics with short sensor readout times. Broadcom spectrometers […]
The Sunbrick LED solar simulator is created for experts who require Class AAA light for large area applications. Scale to any size without sacrificing quality.
The Pico LED solar simulator is created for experts who require Class AAA light in applications <2.5cm x 2.5cm. Explore G2V Optics LED Solar Simulators.
NeoSpectra™ LabStore is a secure market place, where users can easily compare and select NIR calibration models from leading independent calibration developers. The calibration models include a wide range of ingredients, agricultural products, and products from food and animal feed industry. With over a thousand calibration models available, the NeoSpectra™ LabStore is the largest available […]
This calibration light source consists of four halogen illuminators that shine into a 100 mm integrating sphere that is integrated into the light source. Using the 10 mm port adapter, the light source can be docked to the 10 mm port size of the MountainSphere-50-P-Irradiance in a light-tight manner via a bayonet lock. Alternatively, a […]
MAX-351: 300 W Xenon light source for monochromatic light with optional filters MAX-351 is a powerful Xenon light source with fiber output that can be used for various applications. Patented mirror modules prevent the Xenon typical heating of the IR wavelengths. MAX-351 is used in the fields of photocatalysm, photochromism, Artificial photosynthesis, chemical analysis and […]
Raman spectroscopy is often used for product identification, reaction monitoring, remote sensing and characterization of highly scattering particles. Here, the inelastic scattering of the photons of the excitation light on molecules or solids causes a so-called Raman shift, a slight shift of the wavelength of the scattered light with reference to the wavelength of the […]
The innovative and patented HERA hyperspectral cameras offer for the first time the possibility of recording a truly hyperspectral image similar to a conventional RGB camera in “static” mode. Instead of individual wavelengths per pixel, as with snapshot cameras, a completely continuous spectrum is created in each individual pixel of the detector. Thanks to their […]
Besides the in-house new interferometers, which are completely developed and manufactured under one roof, Äpre Instruments offers upgrades of older interferometers of various manufacturers regarding hardware and software. For many decades, optical components have been measured with high-precision interferometers. These instruments are usually very robust and durable. While the interferometer technology has hardly changed until […]
Any fiber-coupled light source can be attached to this compact, software-controlled fiber-to-fiber monochromator, e.g. a LED or laser-pumped plasma light source can be connected. The high light throughput results in a flexible, tunable point light source with high luminance at the output fiber. Thanks to a magnetic-kinematic holder, the optical grating can easily be changed […]
The XWS-X is a laser pumped plasma light source of highest brilliance from Isteq. The principle of XWS light sources is based on the well-known phenomenon of optical discharge. A CW laser is used to drive the Xenon plasma. During operation, the light source works without electrodes, which leads to a significant longer lifetime. The […]
The XWS-65 is a laser pumped plasma light source of medium brilliance and power from Isteq. The principle of XWS light sources is based on the well-known phenomenon of optical discharge. A CW laser is used to drive the Xenon plasma. During operation, the light source works without electrodes, which leads to a significant longer […]
The XWS-30 is a very compact laser pumped plasma light source from Isteq. Laser, electronics and lamp unit are all built in one housing. The principle of XWS light sources is based on the well-known phenomenon of optical discharge. A CW laser is used to drive the Xenon plasma. During operation, the light source works […]
Laser diode module LDM125 with mounting flange This laser of the Imatronic family is an industrial standard laser in round form with an 11 mm diameter round housing, which has a mounting flange with 25 mm in size and two threaded holes. This makes this module very easy to align and mount, which also ensures […]
The robust handheld scanner offers a complete solution for material analysis via near-infrared spectroscopy. Since the NeoSpectra scanner covers a very wide NIR spectral range of 1,350 nm – 2,500 nm, a very good analysis of the measured material is guaranteed. The large measuring spot enables optimal measurement of even inhomogeneous samples. The fully integrated […]
The Panel Laser can be easily mounted on a surface. This laser offers the same optical and electrical performance as the Premier PWM laser module with excellent stability and output power over time and temperature. OEM version: This laser could be integrated into a surface of a closed system or into the wall of a […]
The LaserLyte Flex series is a compact plug-and-play system for beginners with a variety of possibilities in red (635, 650nm) and green (520nm). Green laser light appears twice as bright to the human eye as the same laser power in red. Thus, a projection on dark materials and high ambient light, as well as at […]
LDM150, Sigma, LDM115, LDL175, LCG115 & LLM115 Under the brand Imatronic, Global Laser manufactures laser diode modules according to industry standards. The robust housing contains all optical and electronic components that allow safe and precise projection of various patterns (dot, line, cross, etc.). All lasers have a long operating lifetime. The risk of diode failure […]
The display spectrometers of the Vector line are developed to measure color and luminance from up to six viewing angles. Furthermore the devices feature a flicker sensor. The used technology delivers spectral measurement accuracy, that is required for OLED displays with high color saturation and wide color gamut and, unlike filter-based colorimeters, it is not […]
1260 Gating Cameo/1250 Cameo Very small, compact industrial laser module Intelligent driver electronics Available in 5 different wavelengths Further information Microblock Compact user adjustable aiming/targeting laser Red and infrared wavelengths with powers up to 5mW Ideal in restricted spaces Easy to mount Beam profile: Dot Further information Beta CW High quality, robust CW laser diode […]
Acculase High bore sight accuracy <1 mRad Powers up to 80 mW in red, 150 mW I/R Choice of lenses to provide circular or elliptical beams Further information Premier Powers up to 80 mW in red, 150 mW I/R Choice of lenses to provide circular or elliptical beams Electrically insulated and reverse polarity protected case […]
Lyte-MV, Lyte-MV-EXCEL & GreenLyte-MV-EXCEL Use in conjunction with industrial CCD and CMOS cameras Uniform (non-Gaussian) line with user adjustable focus Further optic options with low zero order intensity CW, linear analogue modulation or digital TTL control Weitere Informationen Lyte-MV 2 Machine Vision Laser Power: 120 mW (blue and red), 50 mW (green), 200 mW (IR) […]
LaserLyte Alignment System Plug and play laser system Available as red or green laser Beam options: dot, cross, line, line + dot No previous technical laser experience required Further information GuideLine 2 Laser System Highly visbible, red or green laser outputs M18 threaded body for easy mounting Water- and dust proof 24 V voltage input […]
StarLine Flexible universal spectrometers SensLine Spectrometers for weak signals CompactLine Miniature spectrometers for OEM and individual customers
AvaLight-DHc (low performance) This fiber-coupled deuterium-halogen light source emits continuously from 200 nm to 2500 nm. The range 200 nm to 400 nm is mainly covered by the deuterium bulb, the range 400 nm to 2500 nm is mainly covered by the halogen bulb. The lamp operates exclusively in cw mode with a stability of […]
Optogama’s crystal hosts and ion dopant combinations are developed for both laser research and industrial applications. Laser crystal Ti:Sapphire Pr:YLF Ho:YLF Tm, Ho:KYW Nd-dotiert Yb-dotiert Er-dotiert Er, Yb co-dotiert Tm-dotiert Cr-dotiert Passive Q-switch crystals Cr:YAG V:YAG Co:Spinel Nonlinear crystals BBO LBO KTP KDP, DKDP Lithium-Niobat AgGaSe2 AgGaS2 ZGP CdSe Raman crystals Bariumnitrat KGW KYW Photorefractive […]
Optogama’s compact beam delivery systems are used to increase or decrease laser beam diameter, control beam divergence and adjust laser power. . Fixed ratio laser beam expanders FEX Divergence adjustable Galilean optical design Grease free mechanical design Wide wavelength range: 200 nm to 2 μm Variable beam expanders VEX and reducers VRE Highest beam pointing […]
Laser optics from Optogama for UV, VIS and NIR-applications are available in the following designs: Dielectric thin-film mirrors Laser line mirrors Broadband laser mirrors Dual and multi wavelength mirrors Variable reflectivity mirrors Laser cavity output couplers Metal-coated mirrors Flat and curved metal-coated mirrors Beamsplitters Wavelength separators and combiners Lenses Plano-convex spherical lenses Plano-concave spherical lenses […]
The compact and cost-efficient AvaLight-HPLED was primarily designed for fluorescence applications. However, this more powerful version of the conventional AvaLight LED is suitable for a number of applications where a high radiant power of a certain color or white light has to be coupled into an optical fiber. The light source can be operated continuously […]
The laser diode drivers of series 4400 deliver up to 100 A injection current and up to 56 V drive voltage. All devices can be analog modulated and operated in CW and QCW mode. In addition to the current output for the primary laser, a control option for a pilot laser possibly integrated in the […]
GEMINI GEMINI is an innovative and compact interferometer that guarantees a very high robustness and stability between the two generated light replicas. GEMINI is perfectly suited for time- and frequency-resolved fluorescence measurements, coherent Raman spectroscopy, pump-probe experiments and fluorescence microscopy of single molecules. Special features: high light throughput → high sensitivity ≈1 attosecond stability between […]
The E3500 is a fully functional, computer-controlled optical tweezer system for the capture and manipulation of microparticles. Like the E3300, it is designed to be attached to high-quality commercial instruments and upgrade them to photonic force microscopes. Typical applications are in biophysics, cell sorting and microrheology, in chemistry, in colloid research and in physics, particle […]
The E3300 is an upgrade attachment especially for biophysicists, which is ideally suited as a single particle trap and for manipulation experiments in the micrometer range. In addition, cell manipulations can be performed very easily using conjugate beam steering optics or the microscope XY sample stage. The E3300 is designed to be attached to a […]
Due to the high demand from dozens of universities for kit-style optical tweezers for laboratory experiments, Elliot Scientific developed the E3200 series. The E3200 is a cost-effective way to purchase and install a complete optical tweezer system without having to specify and build it yourself. The individual systems are all based on optical tables using […]
Surface and wavefront analysis with spectrally controlled standard and high-resolution Fizeau interferometers
The GuideLine 2 lasers are robust alignment lasers for industrial applications with materials like garments, cloth, paper, wood or metal. The product group has an IP67 housing, a thread for easy mounting and can be operated with industrial voltage sources (24V). There are two power levels in the bright red wavelength 635nm and also a […]
Lasers often have a small angular difference between the laser beam and the mechanical centerline of the laser housing (boresight error). With the Microblock laser, you can completely eliminate this error by turning the two grub crews on the outside of the housing accordingly until the center axis alignment is perfectly adjusted. In addition, small […]
Power supplies The manufacturer GLOBAL Laser offers a variety of power supplies for the entire product range of lasers. Lasers with diodes in the red and IR spectrum are typically operated at 5V, blue and green diodes at 10V. There are power supplies and battery supplies. Mounting Clamps Global Laser offers a wide range of […]
The Beta CW module is a robust and high-quality laser module with insulated housing and reverse polarity protection for a variety of applications. GLOBAL Laser offers diodes with different wavelengths (standard are 635, 650, 670 and 780nm) and power levels. An A/R coated collimating lens produces an elliptical beam and can be focused by the […]
Zion is an extremely low-noise camera for use in optical spectrometers or monochromators. The thermoelectric cooling up to 95 °C below ambient temperature reduces the dark current to below 0.0018 e/pix/sec, allowing precise measurements in very low light conditions. Suitable applications are fluorescence, DNA sequencing or optical measurement of biological materials. The CCD detector consists […]
Elliot Martock offers a comprehensive range of adjustors for stages, slide rails and OEM applications. The range includes simple knurled knob adjusters with up to 12 mm travel, to high-precision micrometer fine adjustment screws and miniature adjusters. Precision adjuster Resolution up to 20 nm Travel up to 8.0 mm Smooth-running and mostly load-independent Micrometer adjuster […]
Fiber Control’s MPC1 series of motorized polarization controllers are ideal for use in WDM applications. Following the Lefèvre loop design they enable stable and rapid control of the state-of polarization of laser sources without altering the time-averaged power. Models with 1, 2 and 4 channels are available. They can be equipped with various fibers for applications […]
The manual polarization controllers by Fiber Control make use of stress-induced birefringence to change the polarization state in the inserted fiber. Complete coverage of the Poincaré sphere is achieved by adjusting the paddles. Different versions are available, both with and without inserted fiber. Model FPC-1 is designed to be used with either 250 um bare fibers […]
Elliot Gold™ Series XYZ Stable stage in robust design Various manual adjusters with 20 nm or 200 nm resolution Piezo actuators available, semi-automated on request 2 mm travel per axis 4.5 kg load capacity Orthogonal alignment grooves for accessories The Elliot Martock Gold Series XYZ Flexure Stages are ideal for high-precision instrument manipulation and alignment […]
Miniature linear stages Ultra small, very small and small micropositioners with travels of 3 mm, 5 mm and 10 mm Versions for X, XY, XZ and XYZ axes Various options available, e.g. vacuum suitable, non-magnetic, etc. Accessories available, e.g. fiber rotator, fiber holder, etc. Elliot Martock is known for its outstanding quality and compact design, […]
Workstation MDE881 For alignment of the input and output fiber for fiber optics Precise alignment of 6 axes possible Portable and stable systems, optical table is not required Details about this workstation Details about the long travel version
The AxoStep is the world’s first imaging Müller Matrix microscope. The system creates a complete 2D map of all possible polarization properties in ranges from 9 mm x 7 mm to 40 µm x 30 µm. It can measure the complete Müller matrix of e.g. 80,000 measuring points in only 15 seconds. Application examples LCD […]
The world’s smallest FT-IR sensor of the NeoSpectra Micro™ is based on monolithic MEMS technology and is developed and produced by Si-Ware Systems. In addition to the MEMS chip and InGaAs photodetector, the Micro contains several ASICs for device control and data processing, as well as an optical head. This already consists of a complete illumination […]
If you want to measure not only the total transmission through a sample or reflection on a sample, but also directional and diffuse parts as well as haze values separately and at different angles of incidence, we recommend the MountainSphere. The MountainSphere measurement system was specially designed as a response to multiple customer requests, and […]
The 191F reflection measuring heads are available for different angles of incident light between 0° and 45°. A handheld solution is also available. The measuring head can separately record the reflection of the first surface as well as the complete directional reflection. Typical surfaces are glass, plastic, metal or polished surfaces at least 0.15 mm […]
TRAMP is a transimpedance amplifier with a very low input impedance to measure the short-circuit current of optical sensors at very low irradiance. The instrument was developed as a low-cost laboratory instrument. It has several gain levels and a normal BNC input. A simple voltmeter, oscilloscope or other voltage sensitive instrument can be used to […]
The uSight series includes two configurations. The u-Sight-2000 and u-Sight-X. The uSight-2000 allows the user to perform UV-VIS-NIR measurements at the microscopic level. With a 100X lens, the diameter of the image spot can be reduced to 1µm. This is ideal for investigating the optical transmission, reflection or absorption properties of samples with microscopic structures. […]
Diode collimator assemblies provide a cost effective and high quality OEM solution for manufacturers looking for a compact assembly with laser diode, collimator lens and housing. A DCA consists of an 8mm diameter aluminum housing, an industrial laser diode and a collimating A/R coated lens with direct connection to the laser diode pins. The DCA […]
As a supplier of diodes, reliability is the top priority in order to avoid cost-intensive readjustments. GLOBAL Laser works closely together with the most important manufacturers to ensure a long-term supply. If diodes are no longer offered by the manufacturer, we will help you to find a replacement quickly and easily. We offer a variety […]
This detector expands the GLOBAL Laser Detector product group. It is specially designed for use with modulated lasers. This module has a 5Volt switchable output and can therefore be easily used as a beam interruption system. Complete independence from ambient light is achieved by the fact that the detector only detects certain modulation frequencies, other […]
This product group has been specially developed for long distances. The Survelase creates a small and well defined point at a working distance of up to 140m. These lasers are offered in red (635nm and 650nm) and green (520nm) with a power of up to 5mW. The green light is more than twice as visible […]
Since a long time GLOBAL Laser offers for a large number of lasers a wide range of beam options and diffractive optics. These include lines, circles, crosses, multiple lines, dot matrix, random dot patterns, etc. These additional optics can be supplied with the appropriate screw thread for the laser or without any mount. Custom optics: […]
This detector with its special shape of a small panel (optional IP67) detects VIS-IR laser, also modulated and with certain frequencies. This results in a very strong suppression of the ambient light. It is suitable for use with the 1260 Gated Cameo, the TTL versions of Acculase, Lyte-MV, FireFly and the Imatronic series of GLOBAL […]
This is the classic machine Vision Laser, also with external focus adjustment (EXCEL version). It is successfully used with industrial CCD and CMOS cameras in inspection, measurement and control systems. Beam options: This laser offers very thin lines with very even intensity distribution, no Gaussian distribution. In addition, there are a variety of other optical […]
This is the latest generation of the Machine Vision Laser with external focus adjustment, M18 thread for easy mounting, IP67 housing waterproof and dustproof and a supply voltage of 5 to 30 volts with reverse polarity protection. Thus the laser can be operated with industrial voltage sources, e.g. 24Volt. It is successfully used with industrial […]
The LaserLyte Alignment Series is a compact plug and play system with a variety of possibilities in red and green. These lasers can also be used if no technical laser expertise is available. Some modules have an externally adjustable focus over a large distance range. The front lens does not have to be removed. Beam […]
This detector is an addition to the GLOBAL laser modules without modulation function, such as the Premier, Acculase or Cameo. This detector has an innovative and excellent amplification system, which guarantees a high signal-to-noise ratio > 70dB, even in strong ambient light. Therefore, this detector is also suitable for many outdoor applications. A removable sleeve […]
Global Laser’s BluLyte laser is an easy-to-use, reliable and compact laser module in the violet and blue wavelength range with a number of outstanding features. Beam options: There are a variety of point or elliptical beam shapes, different lines and other diffractive optics options. Operating modes: Stable output power in CW mode over a wide […]
The liquid light guide coupled LED light sources from Prizmatix have been specially developed for microscopy and OEM applications that require a particularly high and homogeneous illumination. They are used for example in machine vision systems, confocal microscopes and life science instrumentation. Due to their compact design with the low-noise controller integrated into the housing, […]
The collimated LED light sources from Prizmatix have a particularly high optical power and are suitable for many applications such as fluorescence microscopy, machine vision, the activation of chemical reactions or the replacement of metal halide and mercury lamps. Based on single-chip emitters and optimized for highest optical performance, the light sources achieve amazing optical […]
The Tempo series is based on the principle of two-wave photorefractive mixing. This method can already represent frequencies from 1 kHz and is theoretically not limited to high frequencies. The output signal is a time-variable analog voltage that is proportional to the instantaneous surface shift in the nm range. The upper cut-off frequency is up […]
The devices of the Quartet series are based on homodyne interferometry combined with a multi-detector setup consisting of 25 detector pairs. This setup is necessary to control the interfering effects caused by laser speckles and to make the procedure very user-friendly. The output signal is a time-variable analog voltage that is proportional to the instantaneous […]
Gulf Photonics is a specialist in manufacturing and assembling. The company focuses on special fibers for medicine, aerospace, semiconductors and spectroscopy. Another domain of Gulf Photonics are their special UV ESR fibers which are specified from 190nm – 800nm. Other fibers or probe types such as UV/SR fibers (200nm – 1100nm) or broadband fibers (200nm […]
The original Beck/Ealing reflecting objectives were originally developed for microscopy and are only offered by a few manufacturers worldwide. They are based on a two-mirror system and, unlike refractive objectives, are free of chromatic aberration. The reflecting objectives are a combination of mirror and lens and consist of primary and secondary mirrors for light focusing […]
For optimal use of First Contact™ Cleaning Polymer, the manufacturer offers a wide range of proven accessories. Please call us if you have any questions regarding your specific application. Applying First Contact™ The brush integrated in the screw cap of the applicator bottle is sufficient for applying First Contact™ solution to surfaces up to 30 mm […]
Using cleaning polymer First Contact™ is THE modern way to clean dirty optics gently and without any residues. Furthermore the dry polymer film protects your optics effectively against dirt and damage during storage and transport. For smaller optics we recommend First Contact™ solution which comes along in kits with an applicator bottle with integrated brush. […]
The uRaman series comprises three configurations. The base is the uRaman-M module. The uRaman-M module is a Raman spectrometer with integrated laser and can be easily integrated into most upright (uRaman-M) and inverted (uRaman-i) microscopes as well as leading microscope manufacturers such as Nikon, Olympus, Leica, Carl Zeiss, etc. The uRaman-M module is a Raman […]
In our specially equipped dark laboratory for radiometry and photometry, we are happy to carry out optical measurements on your behalf. Among others, we can use the optical measurement technology of our manufacturers for this purpose. In this way we are able to combine several measuring components such as light source, integrating sphere or spectrometer […]
Mountain Instruments offers achromatic optics that can be adapted exactly to customer-specific requirements. These include various coatings, mirrors, lenses, windows, prisms, polarization optics, UV and IR optics as well as optical filters. Achromatic lenses are used to minimize or eliminate chromatic aberration. In addition, achromatic design can also be used to reduce spherical aberrations. An […]
The convex optics of Mountain Instruments can be tailored exactly to customer-specific requirements. We offer various coatings, mirrors, lenses, windows, prisms, polarization optics, UV and IR optics as well as optical filters. Depending on the application, we have flat and biconvex optics. Plano-convex optics These lenses focus parallel beams onto a light spot. The spot […]
Mountain Instruments offers concave optics that can be tailored to specific customer requirements. These include various coatings, mirrors, lenses, windows, prisms, polarization optics, UV and IR optics and optical filters. In the field of concave optics, we distinguish between bi- and plano-concave optics. Plano-concave optics Plano-concave lenses convert incident parallel beams into divergent beams. Like […]
The fiber-coupled LED light sources from Prizmatix are an excellent replacement for lasers in many applications such as spectroscopy, optogenetics or crosslinking. Optimized for fiber-coupling and highest optical performance, the light sources achieve amazing optical powers of up to 1100 mW after a 1 m long fiber (NA 0.63, 1500 µm core). Thanks to the […]
Collimating lenses By using a collimating lens at the fiber exit, a homogeneous illumination in square form is obtained instead of a Gaussian distribution. Homogeneity approx. 90%. 3 different types Adjustable focus Telecentric lens (parallel beam output) In combination with a collimating lens (separate article), the additional use of one of the telecentric lenses achieves […]
Micro Support’s various tools for micromanipulators are required for different applications. All tools listed below are suitable for Quick Pro, Axis Pro and Axis Pro FC.
The QuickPro is designed for applications that require or benefit from a micromanipulator and is an addition to an existing microscope in the laboratory. Like the arms of the AxisPro, the individual arms can be controlled very precisely and intuitively via mouse. The mouse and QuickPro arm are connected via a control panel, even without […]
Axis Pro FC is a high-end micromanipulation system. It combines a powerful zoom microscope with a micromanipulator. The housing protects and ensures the best possible performance. All functions, including focusing and manipulation of the sample, are controlled by the PC mouse. For example, particles of 5μm size can be manipulated quickly and easily. It is […]
The easiest way to imagine the AxisPro is as a light microscope with two controllable arms. It consists of four main components: the camera with microscope stand, the stage, and the two arms. All of these components are controlled using the accompanying software, which, apart from a few function keys, is operated exclusively using the […]
Avantes provides a wide choice of optical fibers. All of them are multi-mode fibers with a fiber diameter of 8 µm to 1000 µm. The core consists of silicon dioxide. The following core diameters are available: 8 µm (only for IR fibers, 200 – 800 nm) 50 µm (only for UV or IR fibers, 200 […]
An integrating sphere is used to homogenize the wavelength and radiance of light from a specific source. For this purpose, a sphere is used whose inner surface reflects as efficiently and diffusely as possible, so that maximum homogenization is achieved by multiple internal reflection. Avantes provides the AvaSphere-xx-REFL in three different sizes (30, 50 and […]
This pulsed xenon light source is particularly suitable for fluorescence applications, as it emits a high pulse energy in the UV range from 200 nm (with a special DUV bulb even below 200 nm). The lamp can be synchronized with an Avantes spectrometer via an IC-DB26-2 (accessory) cable. In the AvaSoft the number […]
Avantes provides numerous plasma calibration light sources for the wavelength calibration of a spectrometer. Using their characteristic spectral lines, the calibration curve can be adapted from pixel number to wavelength of a spectrometer. The AvaSoft Full (??) provides a function that makes it very easy to correct the calibration curve. However, the corrected curve is […]
The AvaLight-DH-CAL is suitable for absolute calibrations to spectral irradiance in the UV and visible range (200-1099 nm). As with the AvaLight-HAL-CAL-Mini, the NIST traceably calibrated irradiance refers to the surface of the removable cosine corrector, which can be connected to an optical fiber via an SMA connector. The calibration data are supplied in ASCII […]
This absolutely calibrated halogen light source is ideally suited for spectral calibration to irradiance in the wavelength range from 350 nm to 1095 nm. Optionally, the calibrated NIR wavelength range from 1100 nm to 2500 nm can be ordered. The spectral irradiance is absolutely calibrated on the removable cosine corrector, which can be connected to […]
The AvaLight-HAL-S-MINI is the most powerful fiber-coupled halogen light source from Avantes. It generates continuous and stabilized light in the range from 360 nm to 2500 nm. The focus of the fiber coupling can be manually adjusted to the numerical aperture of the respective fiber. Three different power classes provide the optimal combination of light […]
This fiber-coupled deuterium-halogen light source emits continuously from 200 nm to 2500 nm. The range 200 nm to 400 nm is mainly covered by the deuterium bulb, the range 400 nm to 2500 nm is mainly covered by the halogen bulb. The lamp operates exclusively in cw mode with a stability of < 1 mAU. […]
The AvaLight-DH-S-BAL is almost identical to the AvaLight-DH-S. The AvaLight-DH-S-BAL uses a dichroic filter to drastically reduce the dominant alpha peak at 656 nm. Although the overall light output is lower, the dynamic range is 20 times higher than that of the AvaLight-DH-S. The focus of the built-in collimator can be adjusted to the numerical […]
If more light output is required than with the AvaLight-DHc, the deuterium-halogen light source AvaLight-DH-S can be used. The light output is about 300 times higher in the deuterium range and about 35 times higher in the halogen range than in the AvaLight-DHc. At 656 nm, a dominant deuterium emission line is formed, which limits […]
Super Cold Filters from Asahi Spectra are heat-reflecting filters that are much more efficient than conventional heat-absorbing filters. This means that the substrate (quartz glass) is not damaged even with a high-power light source. Overview of the standard Super Cold Filter products Round with a diameter of 25mm square 50x50mm Customized filters with different specifications […]
Long-pass filters are usually used to isolate areas of a broad spectrum. The purpose of this type of filter is to allow wavelengths above the specified cut-off wavelength to pass and to block wavelengths below the cut-off wavelength. Long-pass filters can provide the desired individual wavelength range in combination with a corresponding short-pass filter. Asahi […]
Neutral density filters are reflective ND filters that are used to diffuse light intensity. The coated chrome film reduces the light by mainly reflecting and partially absorbing it. Asahi’s ND filters are designed to provide uniform spectral performance, particularly in the VIS range, without changing the relative spectral distribution of energy. Nevertheless, they are available […]
Besides light sources, optical fibers and spectrometers, Integrating spheres are an often used instrument for various light mesaurement tasks. The diffuse multiple reflexion of light inside the integrating spheres generates a constant radiance in any direction as well as a homogenization of single wavelenthgs. That means an integrating sphere can be used for example approximately […]
Quantum Northwest offers a wide range of temperature controlled single and multi-cell holders for many applications. Choose from a wide variety of stand-alone units or select a specific cell holder for your existing spectrometer. They are available to fit all major spectrometers like by Agilent, Aimil Chirascan, Aminco-Bowman, Dynamica, Edinburgh Instruments, Hitachi, Horiba, IBH, ISS, […]
Short-pass filters are generally used to isolate areas of a broad spectrum. The task of this type of filter is to allow wavelengths below the output cut-off wavelength to pass and to block wavelengths above the cut-off wavelength. Short-pass filters can provide the desired wavelength range in combination with a corresponding long-pass filter. Asahi Spectra […]
All sun simulators from Asahi Spectra have a special fiber output. This allows a very simple, fast and uncomplicated integration into any measurement setup. All models have a very compact design with high functionality and are easy to transport. HAL-321 Solar Simulator (350 – 1100 nm) The HAL-321 is a sun simulator with a 300 […]
Fast (F/2.8) single monochromator in Czerny Turner design Specifications: Small and compact design Tuning wavelengths from 250nm to 900nm with MAX-350 Monochromator resolution ~ 2.6nm Selection of various gratings Slit width and angle of the grating can be set via remote control Stable performance Easy connection with MAX-350 XENON Light Source (optional)
Bandpass filters are typically used to pass a well-defined wavelength band of the spectrum while suppressing both the long and short wavelength sides of the transmission band. Our coating designs are based on multiple cavity resonators. As a result, our bandpass filters have very steep slopes and very high attenuation outside the narrow 10 nm […]
The multi-channel digital lock-in amplifier SynkTek MCL1-540 (former model 9210 from Signal Recovery) is capable of demodulating up to ten voltage signals and five current signals simultaneously and in two phases. In addition, the signals, including DC components, can be displayed and analyzed via oscilloscope and FFT functions. The MCL1-540 can be operated and evaluated […]
7270 DSP lock-in amplifier The 7270 is the latest model of digital universal lock-in amplifier with dual phase demodulation. As the successor to the tried and tested 7265, it combines all the development stages of DSP lock-in technology since the early 1990s with state-of-the-art operating and evaluation technology. The 7270 operates in the frequency range […]
Minus K Technology vibration isolation tables are based on a patented negative stiffness technology. By reducing building and floor vibrations to unprecedented low levels, Minus K stages ensure optimal performance and highest precision when measuring with vibration-sensitive instruments and devices. How they work: The positive stiffness of the springs is compensated by a mechanism with […]
This fully automatic reflection measurement system simultaneously determines the spectral and colarimetric reflection data at 0° and 45° angles of incidence. The substrates are measured one after the other on a rotating table. The samples consist of coated glass, polished surfaces or diffusely reflecting surfaces. The thickness must be at least 500 µm. The system […]
This semi-automatic reflection measurement system simultaneously and automatically determines complete spectral and colorimetric reflection data at 0° and 45° angles of incidence. Typical surfaces are coated glass, polished surfaces or diffuse scattering surfaces. The substrate must be at least 500 µm thick. The scanning time per measuring point is approx. 200 ms. Thanks to Gamma […]
The TIA 3000 series includes a high performance transimpedance amplifier with dark current values below 3 fA, very high blue light sensitivity and exceptionally high measurement accuracy in wavelength, color and power. The light to be measured is detected by a thermoelectrically cooled sensor and a controller with USB input. The TIA 3000 system is […]
Modern automotive headlight technologies such as HID-, LED- or laser-based lamps, which can be combined with adaptive bend lighting and front light assistant, require precise and reproducible measurements to ensure standards and safety requirements. This requires measurements and comparisons of glare and illumination values. This requires a controlled test environment in which illuminance can be […]
The radiometric sensors from UDT Instruments as part of Gamma Scientific are very versatile in their respective dynamic range and wavelength range. In this way, many applications can be covered. The sensors are NIST-traceable and calibrated in the respective wavelength range at a distance of 10 nm. The individual sensors can be controlled and read […]
The photometric sensors from UDT Instruments as part of Gamma Scientific are specifically designed for the visible area of the human eye to determine illuminance and luminance in different dynamic ranges. The sensors are NIST-traceable and calibrated at an absolute distance of 10 nm. By combining a wide range of optical sensors, detectors and accessories […]
The GS-1160B is a compact and lightweight high speed spectrometer and flicker meter for color and intensity measurements of all common display cases. These include LCDs, LEDs, OLEDs and Quantum Dot Displays. The GS-1160B can be connected to a PC via USB or RS232. Using an API command set, this desktop version of the GS-1160 […]
The GS-1160 Handheld Spectroradiometer is a compact and lightweight high-speed spectrometer and flicker meter for color and intensity measurements of all common display cases. These include LCDs, LEDs, OLEDs and Quantum Dot Displays. The GS-1160’s built-in touch screen and rechargeable battery make it ideal for mobile use.
The GS-1290 is a high performance LED spectroradiometer. The proprietary optical design and back thinned CCD technology allow very precise measurement of very weak light. In addition, the device is also very sensitive in the short-wave range and allows a high measurement accuracy of wavelength, color and absolute intensity. NVLAP’s ISO/IEC 17025 accreditation (NVLAP Laboratory […]
RadOMA GS-1220 Spectroradiometer The GS-1220 spectroradiometer is designed for quality control and high-speed LED testing. The optical integration time is up to 100 ms. The special optical design in combination with a back thinned CCD detector enables precise measurement of extremely weak light, outstanding sensitivity in the blue range and high accuracy in wavelength, color […]
This 1000 W tungsten-halogen light source produces an absolutely calibrated irradiance of 250 nm to 2500 nm. It can be configured as a simple lamp, but it bears the ANSI designation and is calibrated to the 2000 NIST Irradiance Scale, or together with numerous accessories such as a lamp holder, an alignment jig, a lamp […]
The RS-50 VF is mainly used to generate homogeneous irradiance at a distance of 6 to 30 meters or for illumination of areas with up to 50 cm in diameter. The light source is absolutely calibrated for a fixed distance. From a distance of approx. 6 metres, the RS-50 VF can be regarded as a […]
The RS-12DN is a NIST traceable white light standard for radiance or luminance. Using a separate filter, the unit can be converted to a light source for NVIS display simulation. This simulates green light from cockpit displays and additionally outputs a certain level in the NIR range to which a spectroradiometer or radiometer can be […]
This precision halogen light source is absolutely calibrated for irradiance and illuminance and is often used for the calibration of light measuring instruments or optical detectors, spectroradiometers, radiometers or spectrometers. In combination with the RS-70-X extension, the RS-10D light source can also be used as an absolute standard for spectral luminance, luminous intensity, radiance or […]
These precision halogen light sources are absolutely calibrated for radiation flux and are mainly used for the calibration of integrating spheres, light measuring devices and as excitation for detectors. The power can be selected between 5 W and 100 W. The RS-15 is thus a NIST traceable standard for spectral radiant flux or luminous flux […]
The SpectralLED® RS-9 tunable multichannel LED light source consists of an array of 32 LED channels of different wavelengths and three white light channels for the visible wavelength range from 380 nm to 1000 nm. For the IR range there is the RS-9-SWIR with 9 LED channels from 910 nm to 1650 nm. By combining […]
The camera interface boards of the PIXCI® series support over 1000 different camera models from over 70 camera manufacturers. EPIX, Inc. continues to develop new products and expand support for a variety of cameras used in research, industry and other demanding applications. Please contact us if you do not know if your camera is supported.
Avantes offers various cuvette holders suitable for fiber optic spectrometers, but also for many other applications. Holder for 10×10 mm standard cuvettes: for absorption measurement: CUV—UV/VIS for fluorescence measurement: CUV-UV-FL-UV/VIS for absorption and fluorescence measurement: CUV-ALL-UV/VIS for direct mounting to an AvaLight light source: CUV-DA-xxx for direct mounting to an AvaLight light source with integrated filter holder and […]
Avantes offers a wide range of accessories suitable for fiber-optic spectrometers, but also for many other applications. These include e.g. Light sources (deuterium, halogen, xenon, calibration lamps) Integrating spheres Cosine correctors Optical fibers & probes Automatic shutter for comfortable dark current extraction Collimation lenses Cuvette holders Flow cells Beam splitter/ combiner Filter holder Fiber optic […]
All Avantes spectrometers come along with AvaSoft-Basic for all basic functions. The software extension AvaSoft-Full offers additional options and possibilities and is needed for the implementation of other software add-ons. AvaSoft-COL for color measurement AvaSoft-IRRAD for absolutely calibrated measurements of irradiance AvaSoft-CHEM for the determination of chemical concentrations AvaSoft-PROC for pass/fail selection in processes The AvaSoft-ALL package […]
For applications requiring simultaneous operation of multiple spectrometers, Avantes offers space-saving multichannel solutions. Two-channel versions in a compact desktop housing are offered for the spectrometer models of the StarLine family AvaSpec-ULS2048-USB2, AvaSpec-ULS2048L-USB2 and AvaSpec-ULS3648-USB2. The 2-channel spectrometer AvaSpec-UV/VIS/NIR is available for broadband applications from 200 – 1700 nm with exchangeable entrance slits. For desktop instruments […]
Spectrometer for weak signals for measuring color, irradiance, chemometrics, coating thickness, process control
All spectrometers of the AvaSpec-StarLine family offer highest flexibility in configuration at excellent price/performance ratio. Choose between different detectors, gratings and entrance slits and configure a spectrometer that is optimally suited for your application. For even higher flexibility have a replaceable slit (Option –RS) installed. For most detector types Avantes offers a preconfigured version at a […]
AvaSpec-NIRLine: compact fiber optic laboratory spectrometers up to 2500 nm The spectrometers of the Avaspec-NIRLine are available with cooled or uncooled InGaAs detectors in a spectral range from 900 to 2500 nm. All NIRLine spectrometers are fully compatible to the spectrometers of the StarLine and SensLine. By selecting the appropriate grating and entrance slit, you […]
The spectrometers in the Nexos series are no bigger than a deck of cards and have a light weight of 277.5 g. Nevertheless, depending on the configuration, a resolution of up to 0.06 nm can be achieved. Despite their small dimensions, Nexos spectrometers have a high dynamic range of 4500:1, a significant reduction in the […]
Arroyo Instruments offers excellent software for the control of its products for free download. Arroyo Control Arroyo Control is a user-friendly remote control software for all Arroyo instruments, including multiple devices in simultaneous use. It gives you control over your laser driver or temperature controller, providing all the major settings, limits, and adjustments of the […]
In addition to mounts for laser diodes and LEDs, Arroyo also supplies suitable accessories such as connecting cables, rack mounting kits, temperature sensors, etc.
TEST 2
The OEM modules of the LaserPak, TECPak and ComboPak series by Arroyo Instruments – see tables blow – offer the same quality instrumentation and all essential features of the table-top units (see series 4000, 5000 and 6000) at reasonable prices in a smaller OEM solution. They provide USB and/ or RS232 ports for complete remote […]
With Series 7000, Arroyo Instruments is now offering space-saving and cost-effective multi-channel solutions in 19″ format. They are ideally suited for system applications such as burn-in and characterization of laser diodes and LEDs.
The versatile temperature controllers by Arroyo Instruments convince by excellent temperature stability, easy operation and free remote control software at reasonable prices. Overview All temperature controllers feature a fully adjustable PID control with AutoTune function for automatic PID calculation, computer interfaces and accurate temperature, current and voltage measurement. Set temperature, actual temperature as well as […]
Series 4200 and 4300 by Arroyo Instruments offer a wide variety of benchtop laser drivers with injection currents ranging from 100 mA to 20 A. Overview All devices offer special features not found on competing products. These include optically isolated photodiodes and modulation inputs, a programmable PD bias, constant voltage control mode and USB2 interface. […]
Series 6300 by Arroyo Instruments features laser driver and temperature control in a single housing. Various models with laser currents up to 4 Amp are available. For the higher voltage requirement of Quantum Cascade Lasers (QCL) there are special versions with up to 18 V compliance voltage. All devices are equipped with a powerful 60 […]
For operation laser diodes are inserted into temperature-controlled fixtures which also protect them against electrostatic discharge. Arroyo Instruments manufactures mounts for almost all common semiconductor lasers and many LED housings. In combination with the suitable connecting cables to the Arroyo laser and temperature controllers you can easily build up your individual turnkey system. We will […]
Unlike piezo-driven axes, stepper motors are suitable for positioning heavier objects. The design of the motors is very robust and enables small positioning movements of the table despite high thrust and tensile forces. Since it is an external drive, the Micronix step-driven axes are not quite as space-saving as the piezo-driven ones.
The basic principle of stick-slip inertia motion is the controlled use of friction in conjunction with the inertia of the moving part. As shown in the drawing below, an oscillating piezo element is connected to a friction element that moves the sliding friction element forward when the piezo expands due to an applied voltage. When the […]
Linear motors are suitable for applications with high speed requirements. The motors consist of two separate parts, the magnetic housing and the coil. An applied voltage causes the motor to move in one direction. By reversing the polarity, the motor moves in the opposite direction. As it is an external drive, the Micronix linear motor […]
The AxoScan system measures the polarization properties in a single point of the sample. The measurement time is only 30 ms for the complete Mueller Matrix. AxoScan is the industry standard in LCD film and panel testing and is used in many other applications in testing optical components, biological samples and other materials. Application […]
The FPM (Fast Polarization Modulator) series consists of liquid crystal based polarization modulators, which are able to vary the polarization of the transmitted light by an external voltage very fast. The components work vibration-free without moving components. This technique is used in Active retarder 3D displays.
The FOS (Fast Optical Shutter) series is a collection of optical shutters using liquid crystal based optical polarizers. The transmission of light is regulated by an external voltage. Compared to conventional mechanical shutters, the LC shutters operate vibration-free, without moving components and are working with very short switching times.
Arroyo Instruments offers excellent control software for its products for free download. Remote control software Arroyo Control Arroyo Control is a Windows-based, easy-to-use remote control software for all Arroyo instruments, including multiple instruments in simultaneous use. LabVIEW-Treiber The complete LabVIEW library with almost 100% coverage of all command sets and over 120 VIs is a […]
The Lyte-MV 2 provides a reliable industrial light source for a wide range of machine vision applications including triangulation, 3D inspection and alignment. It features IP67 protection, a threaded barrel and the ability to operate from industrial voltage sources such as 24Vdc while still providing market leading modulation features. The Lyte-MV 2 DCLM has the […]